Toddleroo by North States Stairway Secure Gate Sand

Ensure your child is safe and secure around the house with the Toddleroo by North States® Stairway Secure Gate. Made of durable plastic, this baby gate is the perfect solution to use at the top or bottom of a staircase. It offers the ease of one-handed operation and the security of the safety latch design. The neutral sand finish of this gate will stylishly blend with any home décor while its built to withstand rigorous day in, day out use! The Stairway Secure Gate has no threshold to step over and when installed correctly will not swing outward over stairs. Includes all the hardware needed for mounting as a swing gate. Ideal for a variety of openings, this baby safety gate measures from 27 to 41 inches wide and is 27 inches high. When not in use, simply swing the gate out of the way. Every Toddleroo by North States gate is JPMA and ASTM certified. The added security and peace of mind that this gate provides is sure to please. Proudly made in the USA.

• Location: Between Rooms/Hallways, Top of Stairs
• Width: Adjusts to fit 27" - 41" wide
• Mounting: Hardware Mount
• Height: 27"
• Material: Plastic
• Color: Sand
• Safety latch offers easy one-hand operation
• Gate will not swing out over stairs
• Hardware mount between rooms or at the top of stairs
• Pass-through and swing-open convenience
• No threshold to step over
• Proudly made in the USA
• JPMA and ASTM certified

FAQ's:

How do I get the mounting sockets out of my Stairway Gate?
To remove the mounting sockets from the space between the panels, it is best to lay the gate on a flat surface and use your fingers to manipulate the pieces inside to reposition them so that they have the flat side facing down. Do this by reaching through the pliable, plastic webbing.

Also, it is best to move all of the pieces towards the center of the panels as the webbing has the most give there, as opposed to the perimeter of the gate. Once you have done this, slide the top panel open as much as you can. Lift on the top panel (or push down on the exposed webbing of the lower panel) to slide those pieces free.

Do you make an adapter that will let me mount my hardware-mounted gate as a pressure-mounted gate so I do not have to drill holes in my wall?
We do not manufacture, or recommend using, an adapter to alter the way our hardware mounted gates install. All of our Hardware-Mounted Baby Gates must be attached directly to a solid surface such as a wooden stud. This will require drilling holes into the surface.

Can I use wall anchors to install my gate into drywall?
Our Hardware-Mounted Baby Gates should not be installed using anchors. Because drywall anchors have a maximum limit as to how much weight they can withstand, it cannot be guaranteed that the gate will not dislodge and pull from the wall when mounted with an anchor, which could lead to damage or injury. Hardware mounted gates require a solid surface, such as a wooden stud, to be properly installed.

Can I add an extension to my hardware-mounted metal gate?
Not all of our gates have the option to increase its width with extensions. If your gate has additional extensions available, they will be found in our Baby Gate Extensions section of our website. Because extensions are not universal but are exclusive to the gate, the easiest way to find them is to search with the 4-digit model number of the gate. If the gate has additional extensions available for purchase, they will show in the results. Otherwise, the product page of your specific gate will also offer any available extensions that can be purchased separately.