Toddleroo by North States EasyGlide Wide Gate

Looking for added stability in your baby safety gate? The Toddleroo by North States EasyGlide Wide Gate has wheels mounted to the bottom bar of the gate for added support and stability when opening and closing the gate. The included wheels are light gray in color and easily swivel 360 degrees for easy maneuverability when opening and closing. It can be used in either outside wall openings 29.25” to 47.5” or inside wall openings 32.5” to 50.75”. The 4-point mounting brackets allow the extra wide safety gate to be mounted on the inside or outside of a door frame, and can be used at bottom of stairs, doorways or hallways. Lower gate mounts accommodate most tall moldings up to 7” high. At 31 inches tall, the sturdy steel metal construction and decorative warm white finish will complement any home decor while it’s solidly constructed from the highest-quality materials to withstand rigorous day in, day out use. A quick release feature allows for opening on either side of the gate frame, and allows for easy opening and removal for storage. The entire gate swings fully wide open for easy pass through with no threshold. The added security and peace of mind that this gate provides is sure to please. Every Toddleroo by North States baby gate is JPMA and ASTM certified.

• Location: Between Rooms/Hallways, Bottom of Stairs
• Width: Adjusts to fit outside wall openings 29.25" - 47.5" or inside wall openings 32.5" - 50.75" wide
• Mounting: Hardware Mount
• Height: 31"
• Material: Metal
• Color: White
• Quick-Release Feature: Open the entire gate from either side of the gate frame. Allows for easy opening and removal for storage
• Multi-Angle Mounting: Pivot hinges on the gate allow mounting on the inside wall opening or outside wall opening
• Extra Stability and Support: Wheels provide extra support and stability while allowing the gate to glide when opening
• No Threshold: Entire gate swings full width of opening for easy pass through
• Lower Gate Mounts: Lower gate mounts accommodate up to 7” molding
• JPMA and ASTM certified

FAQ's:

Do you make an adapter that will let me mount my hardware-mounted gate as a pressure-mounted gate so I do not have to drill holes in my wall?
We do not manufacture, or recommend using, an adapter to alter the way our hardware mounted gates install. All of our Hardware-Mounted Baby Gates must be attached directly to a solid surface such as a wooden stud. This will require drilling holes into the surface.

Can I use wall anchors to install my gate into drywall?
Our Hardware-Mounted Baby Gates should not be installed using anchors. Because drywall anchors have a maximum limit as to how much weight they can withstand, it cannot be guaranteed that the gate will not dislodge and pull from the wall when mounted with an anchor, which could lead to damage or injury. Hardware mounted gates require a solid surface, such as a wooden stud, to be properly installed.

Can I add an extension to my hardware-mounted metal gate?
Not all of our gates have the option to increase its width with extensions. If your gate has additional extensions available, they will be found in our Baby Gate Extensions section of our website. Because extensions are not universal but are exclusive to the gate, the easiest way to find them is to search with the 4-digit model number of the gate. If the gate has additional extensions available for purchase, they will show in the results. Otherwise, the product page of your specific gate will also offer any available extensions that can be purchased separately.

What is the width of the swinging door on my metal gate?
The width of the swinging door will vary among models.

• The swinging door on Model 4928/4934/4944/4954 is 25.5 inches.
• The swinging door on Model 4929/4930/4936 is 16 inches.
• The swinging door on Model 4957 is 16.5 inches.

What is the space between the bars of my hardware-mounted baby gate?
The distance between the bars will vary among models.

• The distance between the bars on model 4630 is 2.75”.
• The distance between the bars on model 4649 is 2.75”.
• The distance between the bars on Model 4928/4934/4944/4954 is 2.25”.
• The distance between the bars on Model 4929/4930/4936 is 2.25”.
• The distance between the bars on Model 4957 is 2.25”.
• The distance between the bars on Model 4986 2.5”.
• The distance between the bars on Model 5050/5052 is 2.5”.
• The distance between the bars on Model 5150/5151 is 2.25”.