Quick and easy right out of the box, the Toddleroo by North States® Supergate® Ergo in espresso comes to the rescue! This versatile gate keeps your little explorer safe and secure at home or if you’re visiting at Grandma’s house. Designed to securely block doorways, stairways, and other spaces, the Supergate Ergo can be used as a convenient pressure mount gate which requires no measuring or tools. Simply expand the gate in the opening and lock the handle. Well-suited to blocking doorways, the gate includes door sockets that provide extra holding power for pressure mounting in openings between 26 and 42 inches wide. This gate can also be used as a swing gate or a gate for the top of a stairway, all of the necessary hardware is included, simply following the instructions. Proudly made in the USA.
Out of stock
Why does my Supergate no longer stay tight where it is mounted?
Because this is a pressure-mounted gate, the gate requires a great amount of tension to be placed upon the panels to maintain a tight fit when properly installed. When installing the gate, you do not want to start with the panels tightly fitted into your space. You actually may want to have it fit into your space a little bit loosely, with the rubber bumpers lightly brushing the surface on each side. Once you lock the locking handle down into place, it will create the tension/pressure required by bumping the panels out a little bit. If you initially have it placed into the space too tightly, there is nowhere for that tension to go and will result in the plastic cracking or wearing. This can cause the handle, slide and/or gear to break and the gate will no longer hold pressure.
How do I get the hardware out from between the panels of my Supergate?
The best way to remove the hardware and foam is to lay the gate on a flat surface, such as the floor. Extend the top panel out as much as you can. You may need to use your fingers to go through the holes to move the hardware into a position that will allow you to extend the top panel. The plastic webbing is somewhat flexible and has some give permitting you to either lift on the top webbing or push down on the lower webbing. You can do this to create somewhat of an air pocket, allowing the pieces to slide towards the frame of the gate. Once there, you can slide them out.