The Toddleroo by North States® Gathered Home Gate transforms any large openings in your home from precarious to protected in a snap! This gate opens easily with one hand, giving busy parents more time to play and explore with their little one. For additional security, this baby gate offers an extra-wide 25.5 inch walk-through door panel built with a childproof double-locking system and gravity-fed hinge door that has a gentle close. To keep the gate panel open, simply use the hold-open feature to prevent the gate from closing. The quick release hinges allow the gate to be easily removed when the gate is not needed. The Toddleroo Gathered Home Gate hardware mounts on straight or can be angled to fit your space using pivot points on the gate panels. It’s ideal for a variety of room openings and was designed to fit over baseboards and most trim. This gate fits openings 38.3 to 72 inches wide and is 30 inches high. Every Toddleroo by North States baby gate is JPMA and ASTM certified.
The Gathered Home Gate has an additional 15 inch extension (sold separately) that will expand the gate up to 162 inches wide. The 15 inch extension is available under product number 4938. The added security and peace of mind that this gate provides is sure to please.
Can I add an extension to my Gathered Home Gate?
Yes. An optional 6-Bar Extension is available (sold separately). This extension adds 15″ to the width of the gate. A maximum of six extensions can be used.
What is the width of the gate door?
The width of the gate door is 25.5 inches.
What is the space between the bars of my gate?
The space between the bars of your Gathered Home Gate is 2 ¼ inches.
How do I make my gate fit an opening smaller than 72 inches wide?
The gate is designed to fit openings 38.3 inches up to 72 inches wide. If your opening is smaller than 72 inches wide you will need to angle the side panels to accommodate the smaller opening. The side panels can be rotated by loosening the pivot points on the vertical bars which enables you to move them freely until the desired angle is reached.
Why is the latch on my Gathered Home Gate no longer latching?
For the latch to work properly, the gate needs to be installed flat on the ground. If it is flat on the ground and still not latching, perhaps the door panel has become unaligned. Please follow the instructions in the troubleshooting portion on page 7 of the manual to realign the door to ensure that it closes properly. Replacement instruction manuals can be found here.
You must be logged in to post a review.