North States MyPet Tall & Wide Walk Thru EasyPass Pet Gate®

For homes with both large and small pets, the Tall & Wide Walk Thru EasyPass Pet Gate® from North States is a must-have. This hard-to-climb gate stands 36” high and will keep most breeds safely contained in their own space. The patent pending EasyPass pet door makes this gate truly unique. The small door retracts up into the gate tubing at three height intervals (5”, 6.5” & 8”) so it can be left open at the desired height, depending on your pet’s size. This pet door allows smaller dogs and cats the freedom to come and go while larger pets stay contained. When it’s time to close the cat door, simply use the designated slots found on the door and squeeze to gently bring the door down – no annoying dog door that’s been left open to trip over! This safety gate has an extra wide 22” door for the entire family to walk through with ease. To control the direction that the gate swings, a swing control lever allows you to decide - swing in one direction or allow the gate to swing in both directions. This dog gate comes in a crisp white finish that will blend seamlessly with any home decor, while its heavy-duty steel construction is chew-proof and built to last. Quickly and easily install this pressure-mounted gate with the twist of the tension mounts. This gate fits openings from 29.75 - 37.5 inches wide and comes with two extensions.

• Location: Between Rooms/Hallways
• Width: Adjusts to fit 29.75" - 37.5" wide
• Mounting: Pressure Mount
• Height: 36"
• Material: Metal
• Color: White
• Pressure-mount gate is easy to use - extend tension knobs until gate fits tightly
• Patent pending pet door retracts up into gate tubing. Comes with 3 variable height settings: 5", 6.5", 8"
• Extra-wide 22" door opening allows for easy pass through
• Steel construction in a white finish will complement any home décor
• Hard-to-climb barrier with sturdy vertical bars
• Gate height is 36" tall for larger breeds
• Built in door stopper, door can swing in one direction or both directions
• Two extensions are included
• Please note: "When you unpack this gate you will notice that it is not square. This is normal and the gate is not damaged. It is manufactured at a pre-set angle so when it is installed properly in the opening, it will maintain the correct amount of tension and prevent it from being pushed out of the opening under normal use. Please read and follow the instruction manual carefully."

FAQ's:

My pressure-mounted metal gate came out of the package looking bent and has a gap where the latch should be. What do I do?
When you unpack this gate, you will notice that it is not square. This is normal and the gate is not damaged. It is manufactured at a pre-set angle so that when it is installed properly in an opening, it will maintain the correct amount of tension. This tension prevents the gate from being dislodged from the opening under normal use. Please read and follow the instruction manual carefully.

Can I get more extension pins/connectors for my metal gate?
The metal extension pins will be included in the prepackaged hardware package.  Replacement hardware packages can be ordered directly on our website by entering the 4-digit model number into the search engine at the top of any page of the North States website. All available replacement parts will be displayed.

The plastic extension connectors can be ordered directly on our website by entering the 4-digit model number into the search engine at the top of any page of the North States website. All available replacement parts will be displayed.