Toddleroo by North States 3-In-1 Metal Superyard®

Have oodles of options while keeping your child safe and secure using the Toddleroo by North States® 3-in-1 Metal Superyard®. The versatile, six-panel taupe enclosure can act as a portable play yard, a gate or a barrier. As a play yard, it encloses up to 10 square feet and is 30 inches high. The 3-in-1 Metal Superyard is free-standing and sets up in seconds, plus it can be used inside on a variety of floor surfaces and won't slip or scratch. For added convenience, the 3-in-1 Metal Superyard can also be hardware mounted as an extra-wide barrier in your home or a gate, blocking off fireplaces, displays, etc. You'll be thrilled with its many options to fit your busy lifestyle! The one swinging walk-thru panel is built with a child-proof double-locking system allowing easy access. If you'd like to increase the overall size, a two-panel extension is available separately. Every Toddleroo by North States play yard is JPMA and ASTM certified.

• Location: Between Rooms/Hallways, Extra-Wide Openings/Barrier, Free-Standing Enclosure, Various
• Width: As a play yard, encloses 10 square feet, or over 3 feet corner to corner. When used as a barrier, measures over 12 feet wide
• Mounting: Free-Standing, Hardware Mount
• Height: 30"
• Material: Metal
• Color: Taupe
• Versatile: Six-panel enclosure can act as a portable play yard, a gate or a barrier
• Expandable: Two-panel extension increases the play area up to 19 square feet (available separately). When setting the 3-in-1 Metal Superyard up as an enclosure an unlimited number of panels may be used. When setting up as a barrier, the maximum number of panels is twelve.
• Hardware mount as a barrier to block off display and fireplaces
• Adjustable: Connecting spindles allow gate panels to adjust to your space. Lower mounting bracket fits easily above base trim.
• Works on carpet, tile, hardwood floors, etc. without scratching
• Self-Closing hold-open door with childproof double-locking system for safety
• JPMA and ASTM certified

FAQ's:

Can I buy another door panel for my 3-in-1 Superyard?
The doors are not sold separately for these Superyards.

What hardware do I need to mount my 3-in-1 Superyard with an odd number of panels?
The mounting hardware included with your Superyard is to be used when mounting the unaltered barrier with an even number of panels. If you have removed or added a panel and are left with an odd number of panels, you will need to purchase an additional set of hardware to properly mount it. Because each panel has a male edge and a female edge, this will require using the same wall fitting (either both male or both female) from each hardware package to successfully mount it with an odd number of panels.

Additional hardware packages can be ordered by using the search feature located at the top of our website to search with the 4-digit model number. The results will include hardware packages that can be purchased.

How many panels/extensions can be safely added to the original 3-in-1 Superyard?
When setting up as an enclosure, an unlimited number of panels may be used. When setting up as a barrier, the maximum number of panels is twelve.

What metal is used to make the 3-in-1 Superyard?
The 3-in-1 Metal Superyard is made of steel with powder coating (similar to that of household appliances).

Can I place my 3-in-1 Superyard near a fireplace or wood-burning stove?
When used around or near a fireplace or wood-burning stove, the 3-in-1 Superyard should be at least two feet away from the heat source.

What are the measurements of my 3-in-1 Superyard?

• Each panel is 30 inches high and 24 inches wide.
• The swinging door panel opening is 16 inches wide.
• The space between bars of the metal 3-in-1 Superyard is 2 ¼ inches wide.
• The 6-panel enclosure is 10 square feet.
• The 8-panel enclosure is 19 square feet.
• A 10-panel enclosure is 30 square feet.
• A 12-panel enclosure is 44 square feet.

Why is the latch on the door panel of my 3-in-1 Superyard no longer latching?
If the door panel on the 3-in-1 is not aligned, the latch will not function properly. Follow the instructions in the troubleshooting portion of the manual to realign the door to ensure that it closes properly. Replacement instruction manuals can be found on our Instruction Manuals page.

Do you make an adapter that will let me mount my hardware-mounted gate as a pressure-mounted gate so I do not have to drill holes in my wall?
We do not manufacture, or recommend using, an adapter to alter the way our hardware mounted gates install. All of our Hardware-Mounted Baby Gates must be attached directly to a solid surface such as a wooden stud. This will require drilling holes into the surface.

Can I use wall anchors to install my gate into drywall?
Our Hardware-Mounted Baby Gates should not be installed using anchors. Because drywall anchors have a maximum limit as to how much weight they can withstand, it cannot be guaranteed that the gate will not dislodge and pull from the wall when mounted with an anchor, which could lead to damage or injury. Hardware mounted gates require a solid surface, such as a wooden stud, to be properly installed.

Can I add an extension to my hardware-mounted metal gate?
Not all of our gates have the option to increase its width with extensions. If your gate has additional extensions available, they will be found in our Baby Gate Extensions section of our website. Because extensions are not universal but are exclusive to the gate, the easiest way to find them is to search with the 4-digit model number of the gate. If the gate has additional extensions available for purchase, they will show in the results. Otherwise, the product page of your specific gate will also offer any available extensions that can be purchased separately.

What is the width of the swinging door on my metal gate?
The width of the swinging door will vary among models.

• The swinging door on Model 4928/4934/4944/4954 is 25.5 inches.
• The swinging door on Model 4929/4930/4936 is 16 inches.
• The swinging door on Model 4957 is 16.5 inches.

What is the space between the bars of my hardware-mounted baby gate?
The distance between the bars will vary among models.

• The distance between the bars on model 4630 is 2.75”.
• The distance between the bars on model 4649 is 2.75”.
• The distance between the bars on Model 4928/4934/4944/4954 is 2.25”.
• The distance between the bars on Model 4929/4930/4936 is 2.25”.
• The distance between the bars on Model 4957 is 2.25”.
• The distance between the bars on Model 4986 2.5”.
• The distance between the bars on Model 5050/5052 is 2.5”.
• The distance between the bars on Model 5150/5151 is 2.25”.